When repairing the hybrid vehicle export service, many components are in operation. Some of these components are electrified, and all these components will bring certain safety hazards to the repair and maintenance. Now let's explain to us the key points of the safety patch for hybrid vehicle export service. Open flames are not allowed to be brought into gasoline during the repair of hybrid vehicle export service because gasoline is flammable and explosive and can catch fire with a little spark.

When performing the hybrid vehicle export service operation, it is necessary to determine whether the vehicle is in the parking position, ensure that the parking brake is pulled up, and place obstacles on the wheels to prevent the vehicle from moving during repair. When the components of the hybrid vehicle export service are hot, do not touch the repaired vehicle. Allow the components of the vehicle to cool down completely, and the vehicle cooling time should be no less than 15 minutes.

Suppose that the hybrid vehicle export service is to be lifted off the ground in whole or in part, the car is to be lifted with a jack, and it is necessary to ensure that the placed pillars are firmly fixed under the vehicle frame in order to carry out normal repairs. When repairing the vehicle, make sure that children and pets are not nearby to prevent them from suffering unnecessary harm. For friends who still have questions about the water sprinkler truck, it is essential to consult the personnel in a timely manner and master these precautions. Only in this way can it be better used and repaired.

Some parts are prone to deformation due to improper manufacturing, transportation or storage. When inspecting, you can roll the shaft parts around the glass plate once to check if there is any light leakage at the contact point between the parts and the glass plate to determine if they are bent. When choosing the steel plates or friction plates of the clutch driven disc, you can hold the steel plates or friction plates in front of your eyes to observe whether they are warped. When choosing an oil seal, the end face of the oil seal with a skeleton should be a perfect circle and be able to adhere to the flat glass without deflection. The outer edge of the frameless oil seal should be straight. When held by hand, it should deform and return to its original shape when released. When purchasing various types of gaskets, it is also necessary to pay attention to checking the geometric dimensions and shapes.

hybrid vehicle export service https://www.yuanda-export.com/hybrid-suv-car-for-toyota-rongfang-rav4.html